Tapiwa Mutasa
Comments
-
To clarify, a CPU is the physical device that goes into a socket. 1 CPU/socket. Cores are the hardware logical processors on the CPU. Threads are a virtualization of compute capability. You have no...
-
OnScale will only use one thread on a Core. Can you confirm whether it's only one CPU is being used with the other idle or whether one thread is used on each cpu?
-
That is not possible in this product. It is not a computation environment. However, you can your export your data and to the application that you used to create those plots and do it there.
-
Variables which begin with letters i,j,k,l,m and n are implied integers. The length is likely being rounded down to zero which in turn means you have keypoints at the same position if this length w...
-
You can use the "log axis" check box to plot the y axis with a logarithmic scale.
-
It would be best to replicate a CMUT setup electrical connection first. Try implementing the electrical arrangement used for real life CMUT experiments. Regarding amplification, you can try adding ...
-
The changes should have resolved that error and the error message should have changed. If you are still having issues, then there is a second separate issue with your model definition. The first pl...
-
Can you please share your file to onscale-support@ansys.com.
-
Can you please show your definitions for the diamond polymer as well as electrical loads. Screenshots are fine.
-
This should have produced a diamond electrode. Can you please show your commands for creating the diamond polymer as well as the electrode definition.