Chloe Allison
コメント
-
正式なコメント
Hi Tiffany, Your model is reporting 'Data manager contains bad values' which means it is going unstable. One trick to try when this happens is to lower the time stability factor of your model to 0....
-
正式なコメント
Hi Christiano, Are you able to share your files using your preferred cloud file sharing surface to help debug please? The shear damping will depend on the value of damping and the frequency the d...
-
Dutcho, For bonded contact, have a look at the bond command in the Command Reference. For sliding contact have a look at the intr command. Here is an example of two plates with sliding contact....
-
正式なコメント
Hi Vigneshwar, You must override the estimate. Check out this blog post for more details. Best Regards, Chloe
-
Ductho, You can model in Analyst (code-based) or Designer (GUI). Here are a few examples of multi-layered structures: Multi-Layered Transducer BoreHole Acoustics For a half-space structure it i...
-
正式なコメント
Hi Vigneshwar, Take a look at this similar example. Best Regards, Chloe
-
正式なコメント
Hi there, Welcome to the forum! This error means that there is a syntax error in your input deck (i.e. your *.flxinp file). If you open the *.flxprt file generated and scroll to the bottom you ...
-
正式なコメント
Hi Li, Your area scaling was set to 0. If you set this to 1 (or the width of your pmut) you will get a charge record. Best Regards, Chloe
-
正式なコメント
Hi Li, Unfortunately this is a known bug. To work around this for now you must edit the Analyst code. If you click Save Solver Input in Designer this generates a .*flxinp file. Open the *.flxinp f...
-
SD, Unfortunately thermal simulation is not currently supported in Designer. Best Regards, Chloe