Chloe Allison
コメント
-
正式なコメント
Hi Vigneshwar, Unfortunately, OnScale does not have the Shannon wavelet as one of the default time functions. However it is possible to generate this yourself. If you have the Wavelet toolbox in MA...
-
正式なコメント
Hi Vigneshwar, If you want to see the frequency content of the pressure and displacement curves you can use the FFT function in Post Processor: Best Regards, Chloe
-
正式なコメント
Hi Vigneshwar, If you run our SAW example you will see that there is three main resonances within the frequency of interest: The peaks of these curves are parallel/electrical resonances (fp/f...
-
正式なコメント
Hi Vigneshwar, Do you have any material properties of the piezoelectric material? If so this article may help you calculate the properties you require for OnScale. To calculate resonant freque...
-
正式なコメント
Hi Vigneshwar, If you download the *.flxprt file from the simulation it should give you an indication of why the job is failing on the cloud. Best Regards, Chloe
-
正式なコメント
Hi Tiffany! The issue is in the site blok command. You are using nodal indices to define the block region but the command takes xyz co-odrinates (see command ref) so if you change $i1 to $x1 and $j...
-
You can copy the maximum pressure in the water alone into a new data array using data cpyg (see command reference) and specifying the nodal indices of the water area. Best Regards, Chloe
-
正式なコメント
Hi Robin,Yes see line in the Command Reference. Best Regards,Chloe
-
Hi Xiaotong Li, It looks like you are outputting the voltage and charge data in the flxhst and saving the charge as cur.csv. You need the voltage and current data, not charge. To output this add th...
-
Xiaotong Li, Could you please send over symb.SCHComExtr as well please? Thanks, Chloe