Chloe Allison
コメント
-
Hi SD, I have found your problem. If you preview the model you will see that it is just a cylinder of water: You should always preview the model to check the set up is correct. The reason the mo...
-
Sure, send your files to support and I will take a look for you. Best Regards, Chloe
-
No problem, please share your files with support and I can take a look. Best Regards, Chloe
-
You can share a link here, do you have access to a cloud file sharing service such as Dropbox or SharePoint? Best Regards, Chloe
-
No problem, can you please share your files via your preferred file sharing service and I can take a look for you. Best Regards, Chloe
-
正式なコメント
Hi SD, Take a look at the 'no electrodes defined' section of this article. Best Regards, Chloe
-
正式なコメント
Hi Yazan, Welcome to the forum! I am glad you are enjoying simulating in OnScale. We do not have an example of exactly what you are describing, however, we do have a simpler example which appli...
-
正式なコメント
Hi Marcias, You can choose the scale by using the rang option. E.g. /* set up plotting grph set imag avi end /* plot pressure grph plot aprs rang -1e6 1e6 end That will set the scale of the legen...
-
正式なコメント
Hi there, Thank you for your post. To answer your questions: 1. You may have to zoom into the curve to see the signal. You can share your files via your preferred file sharing service and I can che...
-
正式なコメント
Hi H.J, If you are using calc avrg, the signal will be affected by the box size as it is taking the average over an area. For 3 mm box size, the area is 3 times bigger than 1mm box size therefore ...