Chloe Allison
コメント
-
正式なコメント
Hi there, There could be ringing in your results if the simulation has not fully rung down. Check the charge has rung down to almost 0. If it is taking a long time to do that you can increase you...
-
If you have a free package then you have access to 64 'cores' (Core Processing Units). A free account has 10 core-hours to spend which means you can use 1 CPU for 10 hours or 2 CPUs for 5 hours etc...
-
Hi, This is correct. Free and Team accounts are limited to 64 cores. Enterprize accounts have access to 2000 cores. For info on the different plans see here. Best Regards, Chloe
-
正式なコメント
Hi there, Free accounts have certain limitations to the number of cores available. Could you please attach the error message you are receiving so we can check this is correct. Best Regards, Chloe
-
正式なコメント
Hi there, In the portal > Accounts each user has a max CH limit which they cannot exceed. The account manager can edit this by double clicking the number under Max CH. Best Regards, Chloe
-
Hi there, We have looked into this problem further and are unable to reproduce or find out what could be causing this. I would suggest uninstalling, clearing the OnScale registry and re-installin...
-
正式なコメント
Hi SD, Welcome to the forum! A file should be generated called 'yourfilename-esitmate.flxprt'. This should contain the error message. Best Regards, Chloe
-
正式なコメント
Hi Rosa, Welcome to the forum! You can import time dependent temperature data using data hist. Alternatively if you just want to import temperature data to use for calculations you can write the...
-
Hi James, Sorry about the delayed reply. The reason you cannot see the materials at the bottom is because you have defined Begin Y and End Y the wrong way round. In Designer currently, Begin Y mu...
-
正式なコメント
Hi Marin, Welcome to the forum! Yes this is possible. You can apply a pressure load using the plod command (see command reference) and have the top electrode as open. You can then use the follow...