Piotr Kijanka
コメント
-
Here is a link to the input files https://drive.google.com/drive/folders/1jgvP4XjXaeetdWvTWcIgmJsFX9OqiG-8?usp=sharing In this model I want to save velocity profiles in Z axis from ~7700 points to ...
-
Hi Oliver, I ran a simulation one more time. This time however, I used twice smaller model compared to the previous one to make sure that I have enough CH. (Core hour estimate was 45.6; Simulation ...
-
Hi Oliver, Thank you for reimbursing the CH. I really appreciate it. I will change the settings to AWS as you suggest. If the model failed due to not enough CH then it means that despite the ~100 ...
-
Hi Oliver, Any updates on this? Do you need any other information from my side? Thanks, Piotr
-
Here is also a summary of this Job Core Hour Estimate: 101 Total Core Hours: 136.70 Status: FAILED - license acquisition Piotr
-
Oliver, Thanks for the response. You are right that the model is very simple and it should not fail but it did. I did one more test today with this model by reducing a simulation time from 0.05 s t...
-
Oliver, Any updates on this? Have you tried to run the model I sent you? Is there a possibility that the simulation failed due to insufficient memory allocation? I have the impression that the prob...
-
Oliver, No, the storage containes only input files which I shared with you. It did not create any output files. Piotr
-
Hi Oliver, You can download the files from https://drive.google.com/file/d/1fPTzVUgT2pKlKULzWNZibn-5Lpu6e7x_/view?usp=sharing Thanks, Piotr
-
Hi Chloe, I tried to run the simulations with overriding the estimate three times, for 2GB, 3GB, and 10 GB of RAM. Each time I put a 60 CH limit. Unfortanetlly, it did not work. The simulations fai...