Oliver Mashari
コメント
-
Hi Rahul, If you are using analyst then you will see a SITE command this commands allows you to assign materials to regions of the grid you have setup. It will look something like this site re...
-
Hi Rahul, Are you using the analyst or designer mode? Also are you using CAD?
-
Hi, If you are importing CAD like I suggested then have a look at this example https://support.onscale.com/hc/en-us/articles/360004587358-Wave-Propagation-in-Plate-with-Hole-Unstructured-
-
正式なコメント
Hi Alex, This isn't avaliable at the moment but I can put this in as a feature request. Regards, Oliver
-
正式なコメント
Hi Instead you could export a 2D/3D CAD file and use the CAD commands (see command reference) to read the geometry. Supported formats: .step .iges .brep .stl .bdf .obj .sldprt .x_t .b_t .sat .sab ....
-
Can you add the new files you are working with to the google drive linked above and I will look into this. If I remember correctly the last model you were simulating was outputting a ton of data, t...
-
正式なコメント
Hey Claire, It's hard to tell from the image and correct me if I'm wrong but it looks like the Run Solver is greyed out which would suggest you have a cloud only version of the application. If I'm...
-
Hi Piotr, Sorry about the delay. I can reimburse the CH lost due to the fail. The status message Failed - License Acquisition normally means the simulation has failed because you have run out of CH...
-
正式なコメント
Hi Dasom, The keypoint i2 represents the nodal value at the location of the coordiante x2. For example i2 = 100 the next keypoint on this axis i3 = 150 the syntax i2+4 actually means 100+4 = 104 a...
-
正式なコメント
Hi Shyam, It looks like you are trying to use the preview solvers to execute the simulation. The Preview Model option only lets you visualise the model geometry. You need to submit this simulation ...