Chloe Allison
コメント
-
The same properties you fill out in the analyst code, you can also fill out when you add a material in Designer. Best Regards, Chloe
-
正式なコメント
Hi Sneha, Take a look at Help > Command Reference to see where you define the bulk and shear attenuation for the different damping models. E.g. For viscous damping Best Regards, Chloe
-
正式なコメント
Hi Li, Check out this example - https://support.onscale.com/hc/en-us/articles/360019958231-PZT-Disc-2D-TxRx- Best Regards, Chloe
-
Hi Jinho, In OnScale you need to use the old standard graphics to view the mesh. For example: grph type stnd line on plot matrendterm Best Regards, Chloe
-
正式なコメント
Hi Jinho, Remember to add a term command after the end command so the code pauses the execution. Otherwise the preview will only briefly flash on the screen. Best Regards, Chloe
-
正式なコメント
Hi there, I recommend using a skewed grid to curve your model into a semicircle if possible (see this example). This allows you to apply an absr BC to a curved surface easily using boun side. Other...
-
Hi Jakub, Check out this blog. Best Regards, Chloe
-
正式なコメント
Hi there, If you do not know the attenuation properties you do not need to include them, just untick the damping checkbox - We cannot provide the full information on how we calculate the attenua...
-
Hi Mary, I used the version you emailed to support. You have set the wrong Model Type: Tutorial: Your Model: As mentioned in the warning in the tutorial, this setting cannot be changed once it ...
-
Hi there, Please refer to this article. Best Regards, Chloe