TRL Simulation in Designer Interface
Full 3D model of a TRL (Transmit Receive Longitudinal) inspection of a steel pipe with water.
The base CAD model was created in Onshape and allows the following design variables to be adjusted. By default the angle of the cuts on the block and the pipe radius are added as configuration variables for quick access through the Configuration Panel in Onshape.
|Parametric Variable||Description||Default Value|
|wedge_ang||Angle of wedge cuts for sensors||162°|
|pipe_rad||Pipe Radius||152 mm|
|block_ang||Angle of main block cut||15°|
Here are a list of the types of outputs to expect from this model:
- Acoustic pressure at nodes along receiver
- Maximum acoustic pressure field
Post Processor Outputs
|Model Size||9411496 elements|
|Solve Time||525 s (8 CPU)|
|Memory Usage||0.83 GB|
|Recommended CPU Configuration||8 CPU|
CAD Project File
The following project file is required to run this model:
The base CAD Model is publicly available to view and copy through Onshape.