Need Technical Help 回答済み

5件のコメント

• 

  Chloe Allison

  2022年10月06日 10:33

  Hi Abdul,

  You can check the generated 'filename-estimate.flxprt' file for the error message. My guess is that you haven't increased the mesh for the lower frequency so the mesh is likely too coarse and some parts are not being realised anymore, this can cause loading issues etc, but the flxprt file will tell you exactly where the error is occuring.

  Best Regards,

  Chloe

  コメントアクション パーマリンク
• 

  Abdul Hasib Hasan Zayed

  2022年10月06日 15:13

  Hi Chole,
  I can't open .flxprt file. Can you please give me another suggestion. Its really very important for me.
  Here I used wavelength based mesh configuration and 1000 elements per wavelength. 

  コメントアクション パーマリンク
• 

  Chloe Allison

  2022年10月06日 15:51

  Hi Abdul,

   

  What do you mean by you cannot open the flxprt file? Have you downloaded it from the cloud? 1000 elements per wavelength will be an extremely large model. We recommend using 15 elements per wavelength as a guideline but this may need to increase for lower frequency models.

  Meshing is fundamental to accurate results in FEA, for more info have a look at our meshing blog series:

  Part 1 - https://onscale.com/blog/meshing-in-fea-introduction-to-meshing/

  Part 2 - https://onscale.com/blog/meshing-in-fea-meshing-considerations/
  Part 3 - https://onscale.com/blog/meshing-in-fea-mesh-convergence/

  コメントアクション パーマリンク
• 

  Abdul Hasib Hasan Zayed

  2022年10月06日 21:05

  I Can't estimate my model. How can I download a file from cloud?

   

  コメントアクション パーマリンク
• 

  Chloe Allison

  2022年10月07日 08:13

  If your model is failing the estimate, a flxprt file will be generated in the same directory of the file you are estimating.

  Best Regards,

  Chloe

  コメントアクション パーマリンク

サインインしてコメントを残してください。