Chloe Allison
コメント
-
正式なコメント
Hi there, It looks like your model is going unstable after 0.4ms, pmin looks very high. This could be caused by the absorbing boundaries. I would try using impedance boundaries 'side xmin impd'. ...
-
正式なコメント
Hi there, It sounds like you are using the wrong type of file. In Designer mode you must run *.jfp's on the cloud. In Analyst Mode you must run *.flxinp files on the cloud. Best Regards, Chloe.
-
正式なコメント
Hi there, Pressure is in Pascals and speed is in m/s. Best Regards, Chloe.
-
Hi Michael, We are currently working on a CAD solver which allows you to import Solidworks files and use unstructured meshing so this would be the solution to your problem. However, we have not r...
-
Sorry Michael, that is my fault, if you change the input file to read in mat.prjmat it will work. I have also uploaded the other material file Best Regards, Chloe.
-
Hi Michael, Here is a link to a 3D refined grid example and a 3D skew example - https://onscaleus.sharepoint.com/:f:/s/External/EiaK8loyUXFNl-w5YHZRZfwBTRuGKJhfzvaC3K0T92lCfg?e=ww48oc Best Regard...
-
正式なコメント
Hi Michael, Please see the previous forum post - https://support.onscale.com/hc/en-us/community/posts/360006997338-adaptive-grid Also skew should work for this model so let us know what errors you...
-
正式なコメント
Hi Stefanie, In OnScale you can use refined grids to increase the mesh around more detailed areas. Here is a basic example of this - https://onscaleus.sharepoint.com/:u:/s/External/EXqWMLmyAEdPvi...
-
正式なコメント
Hi Zhang, Here is an example of how to get the echo voltage from a pulse echo simulation - https://support.onscale.com/hc/en-us/articles/360015568992-Pulse-Echo-2D Best Regards, Chloe.
-
正式なコメント
Hi there, If you dB/cm then you would specifiy 0.01 as the distance parameter. If you want dB/mm it would be 0.001 etc. Best Regards, Chloe.