Chloe Allison
Comments
-
Sorry Michael, that is my fault, if you change the input file to read in mat.prjmat it will work. I have also uploaded the other material file Best Regards, Chloe.
-
Hi Lucas, Sorry for the delayed reply. I have looked at a few sources and it seems coupling coefficient is often referred to as k^2 which would mean our example is not correct. We are going to do ...
-
Hi Michael, Here is a link to a 3D refined grid example and a 3D skew example - https://onscaleus.sharepoint.com/:f:/s/External/EiaK8loyUXFNl-w5YHZRZfwBTRuGKJhfzvaC3K0T92lCfg?e=ww48oc Best Regard...
-
Official comment
Hi Michael, Please see the previous forum post - https://support.onscale.com/hc/en-us/community/posts/360006997338-adaptive-grid Also skew should work for this model so let us know what errors you...
-
Official comment
Hi Stefanie, In OnScale you can use refined grids to increase the mesh around more detailed areas. Here is a basic example of this - https://onscaleus.sharepoint.com/:u:/s/External/EXqWMLmyAEdPvi...
-
Official comment
Hi Zhang, Here is an example of how to get the echo voltage from a pulse echo simulation - https://support.onscale.com/hc/en-us/articles/360015568992-Pulse-Echo-2D Best Regards, Chloe.
-
Hi Robin, Unfortunately OnScale is not capable of extracting Z displacements from a 2D model, you would need to model in 3D. Best Regards, Chloe.
-
Hi Lucas, The dielectric properties of Si02 will still be considered, the electrical window is just used to specify where the voltage conditions are applied, in this case between LiTaO3 and the el...
-
Official comment
Hi there, If you dB/cm then you would specifiy 0.01 as the distance parameter. If you want dB/mm it would be 0.001 etc. Best Regards, Chloe.
-
Official comment
Hi Arjin, What version are you using? To help debug, could you send over your model and any dependency files to us. It will be easier to debug that way. Thanks, Chloe.