Question about changing circuit during simulation execution 回答済み

5件のコメント

• 正式なコメント

  

  Chloe Allison

  2018年11月16日 17:53 (編集済み 2018年11月16日 17:53)

  Hi there,

  Here is an example that has Tx and Rx in a single model:

  • Tx and Rx in Single Model

  You are correct, you just use a Tx circuit and Rx circuit. Hopefully looking at the code and running the model will help you better understand. 

  Best Regards,

  Team OnScale

   

  コメントアクション パーマリンク
• 

  jinho Sung

  2018年11月18日 11:13

  Thank you for your prompt and kind reply.

   

  However, there is two problems when I run your example code.

   

  1. "SLVR PARD" is not working in my version. I am using PZFlex 2014, so I got an error message, "Illegal solver type --- pard"

  So, I locked "SLVR PARD" code, and run then,

  2. I got an error message, " electrode previously defined as a bc - top"

   

  Can you give me more advice in this situation?

   

  Thank you,

  Sinderely,

  Jinho Sung.

   

   

  コメントアクション パーマリンク
• 

  Chloe Allison

  2018年11月19日 17:21

  Hi Jinho Sung,

  These errors are likely due to the old version of PZFlex you are using. I know this model works well in OnScale, you can sign up for free and get 10 free core hours which you can use to run this model. Here is how you create an OnScale account: https://support.onscale.com/hc/en-us/articles/360005535831-Creating-an-OnScale-Account

  Best Regards,

  Team OnScale.

  コメントアクション パーマリンク
• 

  jinho Sung

  2018年12月10日 12:11 (編集済み 2018年12月10日 12:30)

  Dear Sir,

  Thank you for the confirmation and information that 10 free core hours.

  However, after 10 free hours, it is difficult to get new version of PZFlex due to budget as you know,

  I would really appreciate if you give me another recommendation.  

  (I remember that an example code about swapping circuit in one source code was posted in the user forum. But I cannot find the code anymore because of webpage renewal.)

   

  Thank you,

  Sincerely,

  Jinho Sung

  コメントアクション パーマリンク
• 

  Chloe Allison

  2018年12月10日 13:24

  Hi Jinho Sung,

  This is the example that swaps the circuit. The only other thing I can recommend is to try using separate transmit and receive models. If you are still experiencing problems, send your files over to support@onscale.com and someone will have a look at them for you.

   

  Best regards,

  Team OnScale.

  コメントアクション パーマリンク

サインインしてコメントを残してください。