Chloe Allison
コメント
-
正式なコメント
Hi Robin, The command reference for the viscous line element does not render the equation properly (we will fix this). It should be: F = c1 * x_dot^c2 , where x_dot is x with a dot on top. This is...
-
Hi Robin, Yes you should be able to enter 0 mass and the longitudinal velocity of the spring. Line gcon is only required if you are using an unstructured grid, I am assuming you are working with st...
-
Hi there, I have just copied your code and run it without error: Could you actually share the file via your preferred cloud sharing service (instead of copying and pasting the code) as there man...
-
Hi Mohammed, Could you zip all your files (including *.flxprt) and share them via your preferred file sharing service please and I can take a look. Best Regards, Chloe
-
正式なコメント
Hi Robin, It appears you have defaulted the mass and vmax in the prop command but the command reference specifies that there is no default. Check the command reference but I would recommend input...
-
Tiffany, In this case you will likely need to override the estimate as mentioned in the blog post. Best Regards, Chloe
-
正式なコメント
Hi Tiffany, I have answered your memory question on the previous forum post. With regards to reflections at the boundary, we recommend the boundary is at least 3 wavelengths from the source to ...
-
Hi Tiffany, If there is a memory issue, here is a blog that will hopefully help you overcome this. Also if you are sweeping from 500 kHz to 2 MHz ensure that you sweep from the largest simulati...
-
正式なコメント
Hi Mohammed, Welcome to the forum! There are a couple of ways you could create this geometry: GDSII file - OnScale supports GDSII import CAD - OnScale supports the importation of many types of CA...
-
正式なコメント
Hi Vigneshwar, You should output the field data for the stress tensor you are interested in e.g. data out modl out sgyy end If you are interested in stress ensure the stress arrays ...