Chloe Allison
コメント
-
正式なコメント
Hi Galen, This is something we are currently working on. I will be sure to put in a tutorial on how to do this when the code is implemented and released. Best Regards, Chloe.
-
That's good, let us know if you see that again and send over a picture. Thanks
-
Hi Lucas, Are you plotting the curve from Results Manager > Frequency History > Impd:top.amp? This is always in the frequency domain. Can you send a picture through of what you have and I can take...
-
Could you send your model and all the supporting files to support@onscale.com and I will look into this for you.
-
Hi, Try using estimate override which allows you to override the estimate. Steps: 1. Go to the cog in the right hand corner to open options 2. Go Cloud Account Configuration and tick the Enable ...
-
Hi there, this sounds like a bug with the Material tool that we have seen recently which has been fixed in our current release. Try updating to OnScale 1.28.5.0 (this can be downloaded from the OnS...
-
Hi there, There is no command to save data points in dB but you can do this in Review or you can do this in post processor. If you want to see the impedance magnitude and phase in a logarithmic s...
-
正式なコメント
Hi Shruthi, This is a good question. Here is some code you can use for the basic definitions i.e. positive y direction etc. axis form vctr defn posx car2 0. 0. 0. 1. 0. 0. 0. 1. 0. /* P...
-
You can only use zoom using standard graphics. Here is some example code: grph type stnd plot matr zoom 2 pan u 0.1 end This code will plot your materials in standard...
-
正式なコメント
Hi there, You have to do this in Analyst Mode, you cannot do this in Designer yet. Here is an example of a 2D PZT plate in water in which I have meshed the pzt plate finer in the thickness than th...