박기융
Activity overview
Latest activity by 박기융-
박기융 created a post, Answered2d model / 3d model difference
I made a simple pzt disc with 2D designer and 3D designer. I set all of the variable same, but there is little differences.Below is the result of Piezo top displacement in 2D(Black) and 3D(Blue). I...
-
박기융 commented, sorry for my late reply Here is my entire script. I only change my simulation time constant but get the difference result. Thanks for your help :)c Set model title titl Training PZT 2D Disc Example...
-
박기융 created a post, Answeredsimtime in analyst mode
Hi I have questions about simtime in analyst mode c Runtime calculationssymb #get { step } timestep /* Extract calculated timestep from PRCS commandsymb simtime = 20 / $freqint /* Simulat...
-
박기융 commented, I understand this code as applying voltage load but is this code means i should give pressure load? bc top volt func /* Apply voltage condition to 'top' electrode and assign driving signal 'func'
-
박기융 created a post, Answeredsimulation run time
Hi these days i am studying about analyst mode and i have a questions. I understand "simtime" in analyst mode is same as a "simulation run time(s)" in designer mode. But if i change the input frequ...
-
박기융 commented, Thanks for answering. i want to comparing these two solver file but the grammer looks little bit different as i can't compare it well. i allow the access and i have problem getting same top piezo v...
-
박기융 created a post, Answeredwatr -> air
Hii want to see the acoustic pressure movement for simple PZT 2D DISC (tx/rx) like this example (https://support.onscale.com/hc/en-us/articles/360019958231-PZT-Disc-2D-TxRx-) but if i change water ...
-
박기융 created a post, Answeredanalyst mode to designer mode
HiI want to get same output from this examples in onscale website(PZT disc 2D (Tx/Rx)https://support.onscale.com/hc/en-us/articles/360019958231-PZT-Disc-2D-TxRx- This example is made from analyst ...
-
박기융 created a post, Answered3D Symmetric
Hi i want to see the cross section view of 3d PMUT, so i made half of it and use symmetric to see the cross section.Actually, i did get a cross section view, but now i want to see the whole PMUT, i...
-
박기융 created a post, Answered2D symmetric(Y axis) / area scaling
Hi i have some questions about shape of model of 2D y-axis symmetric mode.I always get an result of 2d y-axis symmetric as half cylinder,but if i want to get model as cylinder, is there any way i c...