3. Line Plot

Follow

The line plot works in a similar fashion to the location response except, now the point of interest becomes a 'line' of points.

The line plot requires 2 points to start and end the line: enter the XYZ distances for both points and a blue line will appear on the interface. The number of pressure data points along the line can also be altered (1000 points max). Select the frequency to drive your device and the output type: magnitude of the pressure or the time responses as the wave passes through the points along the line. For the time response there will be many curves on the graph so there is a curve customisation button to distinguish between the data points.

0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.